Filter Replacement for Frozin 400 Cold Plunge System

Step-by-Step

1. 1

   Power down the system

   Turn off and unplug the chiller so the pump is not running while the filter housing is open.

2. 2

   Open the filter housing

   Unscrew the filter housing cap. Keep a towel handy as a small amount of water will drain out.

3. 3

   Remove the old filter

   Pull the used cartridge straight out and dispose of it. Rinse any debris from inside the housing.

4. 4

   Insert the new filter

   Slide in a new Frozin replacement filter, making sure it seats fully and the housing gasket is clean and in place.

5. 5

   Close and restart

   Screw the cap back on hand-tight, power the chiller on, purge any trapped air and check for leaks. Replace filters every 2–4 weeks with regular use.